Production inventory models for deteiorative items with three levels of production and shortages
DOI:
https://doi.org/10.2298/YJOR150630014KKeywords:
EPQ, deteriorative items, cycle time, demand, three levels of production, optimalityAbstract
In this paper, three level production inventory models for deteriorative items are considered under the variation in production rate. Namely, it is possible that production started at one rate, after some time, switches to another rate. Such a situation is desirable in the sense that by starting at a low rate of production, a large quantum stock of manufacturing items at the initial stage are avoided, leading to reduction in the holding cost. The variation in production rate results in consumer satisfaction and potential profit. Two levels of production inventory models are developed, and the optimum lot size quantity and total cost are derived when the production inventory model without shortages is studied first and a production inventory model with shortages next. An optimal production lot size, which minimizes the total cost, is developed. The optimal solution is derived and a numerical example is provided. The validation of the results in this model was coded in Microsoft Visual Basic 6.0.References
Harris, F.W., "How many parts to make at once," Factory, the magazine of management, 10 (2) (1913) 135–136.
Ghare, P.M. and Schrader, G.P., "A model for an exponentially decaying inventory," Journal of Industrial Engineering, 14 (5) (1963) 238–243.
Sharma, K.V.S., "A deterministic order level inventory model for deteriorating items with two storage facilities," European Journal of Operation Research, 29 (1) (1987) 70–73.
Khieng, J.H., Jihad, L., and Richard, J.L., "An order level lot-size inventory model for deteriorating items with finite replenishment rate," Computers Industrial Engineering, 20 (2) (1991) 187–197.
Pakkala, T.P.M., and Achary, K.K., "A deterministic inventory model for deteriorating items with two warehouses and finite replenishment rate," European Journal of Operational Research, 57 (1) (1992) 71–76.
Wee, H.M., "A Deterministic lot size inventory model for Deteriorating items with shortages and a declining market," Computers & Operation Research, 22 (3) (1995) 345–356.
Zaid, T., Balkhi, Lakdere, Benkherouf, "A production lot size inventory model for deteriorating items and arbitrary production and demand rates," European Journal of Operational Research, 92 (2) (1996) 302–309.
Bhaba, R.S., Subbasis, M., and Chidambaram, V.B., "An order-level lot size inventory model with inventory-level dependent demand and deterioration," International Journal of Production Economics, 48 (3) (1997) 227–236.
Teng, J.T., Chern, M.S., and Yang, H.L., "Deterministic lot-size inventory models with shortages and deteriorating for fluctuating demand," Operations Research Letters, 24 (1-2) (1999) 65–72.
Skouri, K. and Papachristos, S., "A continuous review inventory model, with deteriorating items, time-varying demand, linear replenishment cost, partially time-varying backlogging," Applied Mathematical Modelling, 26 (5) (2002) 603–617.
Chund, C.J. and Wee, H.M., "Scheduling and replenishment plan for an integrated deteriorating inventory model with stock-dependent selling rate," International Journal of Advanced Manufacturing Technology, 35 (7-8) (2008) 665–679.
Cardenas-Barron, L.E., "Optimal manufacturing batch size with rework in a single-stage production system - A simple derivation," Computers and Industrial Engineering Journal, 55 (4) (2008) 758–765.
Mingbao, C. and Guoquing, W., "A note on the inventory model for deteriorating items with trapezoidal type demand rate," Computers & Industrial Engineering, 56 (4) (2009) 1296–1300.
Cardenas-Barron, L.E., "Economic production quantity with rework process at a single-stage manufacturing system with planned backorders," Computers and Industrial Engineering Journal, 57 (3) (2009) 1105–1113.
Hui Ling Yang, Jinn-Tsair Teng and Maw-Sheng Chern, "An Inventory model under inflation for deteriorating items with stock-dependent consumption rate and partial backlogging shortages," International Journal of Production Economics, 123 (1) (2010) 8–19.
Mingbao Cheng, Bixi Zhang and Cuoqing Wang, "Optimal policy for deteriorating items with trapezoidal type demand and partial backlogging," Applied Mathematical Modelling, 35 (7) (2011) 3552–3560.
Hassan, S. and Bita, B., "Developing a location-inventory model under fuzzy environment," International Journal of Advanced Manufacturing Technology, 63 (1-4) (2012) 191–200.
Jia-Tzer Hsu and Lie-Fern Hsu, "Integrated vendor-buyer cooperative model in an imperfect production process with shortage backordering," International Journal of Advanced Manufacturing Technology, 65 (1-4) (2013) 493–505.
Wee, H.M., Wang, W.T., Lee, M.C., Cardenas-Barron, L.E., "Solving a finite horizon EPQ problem with backorders," Applied Mathematical Modelling, 37 (14-15) (2013) 7876–7882.
Wee, H.M., Wang, W.T., Cardenas-Barron, L.E., "An alternative analysis and solution procedure for the EPQ model with rework process at a single-stage manufacturing system with planned backorders," Computers and Industrial Engineering Journal, 64 (2) (2013) 748–755.
Hsu, J.T. and Hsu, L.F., "An integrated vendor-buyer inventory model with imperfect items and planned back orders," International Journal of Advanced Manufacturing Technology, 68 (9-12) (2013) 2121–2132.
Sivashankari, C.K. and Panayappan, S., "Production inventory model with reworking of imperfect production, scrap and shortages," International Journal of Management Science and Engineering Management, 9 (1) (2013) 9–20.
Sivashankari, C.K. and Panayappan, S., "Production inventory model for three levels of production with integrated cost reduction delivery policy," European Journal of Scientific Research, 116 (2) (2013) 271–286.
Sivashankari, C.K. and Panayappan, S., "Production inventory model for two levels of production with defective items and incorporating multi-delivery policy," International Journal of Operation Research, 19 (3) (2014) 259–279.
Entezari, A.R., Karimi, B., Kianfar, F., "Optimal production control and marketing plan in two-machine unreliable flexible manufacturing systems," International Journal of Advanced Manufacturing Technology, 73 (1-4) (2014) 487–496.
Shafieezadeh, M. and Sadegheih, A., "Developing an integrated inventory management model for multi-item multi-echelon supply chain," International Journal of Advanced Manufacturing Technology, 72 (5-8) (2014) 1099–1119.
Mousavi, S.M., Hajipour, V., Niaki, S.T.A., Aalikar, N., "A multi-product multi-period inventory control problem under inflation and discount: a parameter-tuned particle swarm optimization algorithm," International Journal of Advanced Manufacturing Technology, 70 (9-12) (2014) 1739–1756.
Sivashankari, C.K. and Panayappan, S., "Production inventory model for two levels of production with deteriorative items and shortages," International Journal of Advanced Manufacturing Technology, Springer, 2014.
Downloads
Published
Issue
Section
License
Copyright (c) 2017 YUJOR
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
