Reliability Optimization Methods: A Systematic Literature Review
DOI:
https://doi.org/10.2298/YJOR230715031SKeywords:
Reliability, availability, RPGT, maintenance, PSO, productivity.Abstract
The industry is a system that combines parallel, series, or combination of two to transform cheap raw materials into valuable goods. Occasionally, the system may also consist of subunits that can be arranged in various ways. The series arrangement is represented when the system fails completely because of the failure of every subunit (also called complete failure); conversely, when the system operates with low efficiency, i.e., this illustrates the arrangement in a parallel fashion in a reduced state (called partial failure). In order to learn about the advancements in the field of reliability theory and to determine which research methods are most frequently employed by researchers, a brief survey covering the years 1958 to 2024 was conducted for the paper. The overall impact of the functioning system's state on its dependability is further discussed in this study by reviewing 112 papers selected from the study of 220 papers taken from reputed journals. In this study, we've taken into account the reviews of numerous researchers and investigated the most popular approach for overcoming others' obstacles. Additionally, which variables influence the primary reliability metrics in their work and how? These are complemented by graphics and table.References
B.J. Flehinger, “Reliability Improvement Through Redundancy at Various System Levels,” IBM Journal of Research and Development, vol. 2, no. 2, pp. 148-158, 1958.
S. Prakash, “Some Reliability Characteristics of a Stand-by Redundant Equipment with Imperfect Switching,” Microelectronics Reliability, vol. 10, no. 5, pp. 419-423, 1970.
K. Usha and R. Ramanarayanan, “Two n-unit Cold-Standby Systems with an Erlang Distribution,” IEEE Transactions on Reliability, vol. 29, no. 6, pp. 434-435, 1980.
D. Kumar, J. Singh, and I.P. Singh, “Availability of the Feeding System in the Sugar Industry,” Microelectronics Reliability, vol. 28, no. 7, pp. 867-871, 1988.
D. Kumar and J. Singh, “Availability of Washing System in Paper Industry,” Microelectronics Reliability, vol. 29, no. 6, pp. 775-778, 1989.
L. R. Goel and P. Shrivastava, “Profit Analysis of a Two-Unit Redundant System with Provision for Rest and Correlated Failures and Repairs,” Microelectronics Reliability, vol. 31, no. 6, pp. 827-833, 1991.
W. Li, A.S. Alfa, and Y.Q. Zhao, “Stochastic Analysis of a Repairable System with Three Units and Two Repair Facilities,” Microelectronics Reliability, vol. 38, no. 7, pp. 585-595, 1998.
J. Singh and P. Mahajan, “Reliability of Utensil Manufacturing Plant - A Case Study,” Opsearch, vol. 46, no. 3, pp. 260-269, 1999.
K.H. Wang and C.C. Kuo, “Cost and Probabilistic Analysis of Series Systems with Mixed Standby Components,” Applied Mathematical Modelling, vol. 24, no. 12, pp. 957-967, 2000.
B. Parashar and G. Taneja, “Reliability and Profit Evaluation of a PLC Hot Standby System based on a Master-Slave Concept and Two Types of Repair Facilities,” IEEE Transactions on Reliability, vol. 56, no. 4, pp. 534-539, 2007.
M. K. El-Said and R. A. EL-Hamid, “Comparison of Reliability Characteristics of Two Systems with Preventive Maintenance and Different Modes,” Information and Management Sciences, vol. 19, no. 2, pp. 107-118, 2008.
A.M Rashad, M.S. El Sherbeny, and Z.M. Hussien, “Cost Analysis of a Two Unit Cold Standby System With Imperfect Switch, Patience Time and Two Types of Repair,” Journal of Egyptian Mathematical Society, vol. 17, no. 2, pp. 65-81, 2009.
S. Chander and R.K. Bhardwaj, “Reliability and Economic Analysis of 2-out-of-3 Redundant System with Priority to Repair,” African Journal of Mathematics and Computer Science Research, vol. 2, no. 4, pp. 230-236, 2009.
R.K. Bhardwaj and S.C. Malik, “MTSF and Cost Effectiveness of Two out of Three Cold Standby System with Probability of Repair and Inspection,” International Journal of Engineering Science and Technology, vol. 2, no. 12, pp. 5882-5889, 2010.
S. Singla, A.K. Lal, S.S. Bhatia, and J. Singh, “Reliability Analysis of Polytube Industry using Supplementary Variable Technique,” Applied Mathematics and Computation, vol. 217, no. 8, pp. 3981-3992, 2011.
Mohammed A. Hajeeh, “Reliability and Availability of a Standby System With Common Cause Failure,” International Journal of Operational Research, vol. 10, no. 5, pp. 343-363, 2011.
S. Singla, A.K. Lal, and S.S. Bhatia, “Comparative Study of the Subsystems Subjected to Independent and Simultaneous Failure,” EKSPLOATACJA I NIEZAWODNOSC-Maintenance and Reliability, vol. 13, no. 2, pp. 63-71, 2011.
I. Yusuf and S.I. Bala, “Stochastic Modelling of Two Unit Parallel System Under Two Types Failures,” International Journal of Latest Trend in Mathematics, vol. 3, no. 1, pp. 44-53, 2012.
A. Kumar and S.C. Malik, “Modelling of a Computer System with Priority to S/W Replacement over H/W Replacement Subject to MOT and MRT,” International Journal of Pure and Applied Mathematics, vol. 76, no. 1, pp. 233-241, 2012.
M. Kakkar, A. Chitkara, and S. Kumar, “Reliability Analysis of a Cold Standby System with Repair-Equipment Failure and Appearance and Disappearance of a Repairman with Core Related Lifetime,” International Journal of Scientific and Engineering Research, vol. 3, no. 5, pp. 1-6, 2012.
I.Yusuf and N. Hussaini, “Evaluation of Reliability and Availability Characteristics of 2-out-of-3 Standby System Under a Perfect Repair Condition,” American Journal of Mathematics and Statistics, vol. 2, no. 3, pp. 114-119, 2012.
S. Kajal and P.C. Tewari, “Performance Optimisation for Skim Milk Powder Unit of a Dairy Plant Using Genetic Algorithm,” International Journal of Engineering, vol. 5, no. 3, pp. 211-221, 2012.
S.C. Malik, “Reliability Modelling of a Computer System with Preventive Maintenance and Priority Subject to Maximum Impression and Repair Times,” International Journal of System Insurance Engineering and Management, vol. 3, no. 1, pp. 94-100, 2013.
H. Garg, “Reliability , Availability and Maintainability Analysis of Industrial System Using PSO and Fuzzy Methodology,” MAPAN-Journal of Metrology Society of India, vol. 28, no. 2, pp. 115-129, 2013.
I. Yusuf and N. Hussaini, “A Comparative Analysis of Three Unit Redundant System with Three Types of Failure,” Arabian Journal of Science and Engineering, vol. 38, no. 10, pp.
3337-3349, 2013.
N. Chaudhary, P. Goel, and S. Kumar, “Developing the Reliability Model for Availability and Behaviour Analysis of a Distillery using Regenerative Point Graphical Technique,” International Journal of Informative and Futuristic Research, vol. 1, no. 3, pp. 26-40, 2013.
A.K. Aggarwal, V. Singh, and S. Kumar, “Availability analysis and performance optimisation of a butter oil production system: a case study,” International Journal of System Assurance Engineering and Management, vol. 5, no. 4, pp. 538-554, 2014.
P. Kumar, R. Kumar, P. Dahmani, and D. Narula, “RAM analysis of some process industries: a critical literature review,” International Journal of Mechanical Engineering and Robotics Research, vol. 3, no. 3, pp. 171-179, 2014.
I. Yusuf, K. Suleiman, and Y. Bashir, “Stochastic modeling and analysis of a repayable 2 out of 4 system,” International Journal of Mathematics in Operational Research, vol. 5, no. 1, pp. 23-34, 2014.
B. Devi, R. Bansal, and P. Goel, “Reliability and Behavioral Analysis of Yarn Industry of Malwa Region Using RPGT,” International Journal of Engineering Technology, vol. 4, no. 2, pp. 135-145, 2015.
R. Kumar, M. Rani, and P. Goel, "Availability modeling and behavioral analysis of warm & cold stand-by three units system," International Journal of Engineering Technology, Management and Applied Sciences, vol. 3, no. 7, pp. 189-202, 2015.
R. Kumar, Sarla, and P. Goel, "Availability modeling of two unit warm standby system having imperfect switch-over device," International Journal of Engineering Technology Science and Research, vol. 4, no. 6, pp. 202-212, 2015.
M. Rani, R. Bansal, and P. Goel, "Reliability, availability and cost optimization of a juice plant (A case study of Malwa Region Plant)," International Journal of Engineering Technology Science and Research, vol. 4, no. 5, pp. 90-97, 2015.
Sarla, R. Bansal, and P. Goel, "Availability and behavioral analysis of spinning mill with scheduling (A case study of Spinning Mill of Malwa Region)," International Journal of Engineering Technology Science and Research, vol. 4, no. 6, pp. 115-122, 2015.
P. Goel and Ritikesh, "Availability modeling of single unit system subject to degradation post repair after complete failure using RPGT," International Journal of Computer and Mathematical Sciences, vol. 3, no. 3, pp. 57-65, 2015.
S. Sharma, S. Gupta, and P. Goel, "Availability modeling and analysis of fiber glasses industry using RPGT and its gamma-rays absorption studies," International Journal of Engineering Technology, Management and Applied Sciences, vol. 3, no. 8, pp. 152-161, 2015.
M. Navneet and P. Goel, "The profit analysis of two modules under software and hardware repair," International Journal of Engineering Technology, Management and Applied Sciences, vol. 3, no. 6, pp. 111-119, 2015.
R. Bansal, Rajkala, and P. Goel, "Availability and behavioral analysis of edible oil refinery using RPGT," International Journal of Engineering Technology Science and Research, vol. 4, no. 7, pp. 123-133, 2015.
N. Chaudhary, Bharti, and P. Goel, "Availability analysis of a milk dairy plant using RPGT," International Journal of Engineering Technology Science and Research, vol. 4, no. 5, pp. 79-89, 2015.
V. Goyal, R. Goel, and P. Goel, "Behavioral analysis of two unit system with preventive maintenance in both units and degradation in one unit," International Journal of Engineering Technology, Management and Applied Sciences, vol. 3, no. 9, pp. 120-130, 2015.
A. K. Aggarwal, S. Kumar, and V. Singh, "Reliability and availability analysis of the serial processes in skim milk powder system of a dairy plant: A case study," International Journal of Industrial and Systems Engineering, vol. 26, no. 1, pp. 36-62, 2015.
R. Kumar and P. Goel, "Availability analysis of banking server with warm standby," International Journal of Statistics and Applied Mathematics, vol. 4, no. 1, pp. 24-35, 2016.
P. Kumar, "Profit and behavior of two unit system with standby," International Journal of Advanced Science and Research, vol. 2, no. 4, pp. 41-48, 2016.
Gitanjali and S. C. Malik, "Reliability measures of two unit parallel system with different repair policies of the servers," International Journal of Innovations in Engineering and Technology, vol. 7, no. 4, pp. 336-345, 2016.
I. Yusuf, "Reliability modelling of a parallel system with the supporting device and two types of preventive maintenance," International Journal of Operational Research, vol. 25, no. 3, pp. 269-287, 2016.
J. Kumar and M. Goel, "Availability and profit analysis of a two unit cold standby system for a general distribution," Cogent Mathematics, vol. 3, no. 1, pp. 1-13, 2016.
R. Garg, "Review article on RPGT - a general approach," International Journal of Engineering Technologies and Management Research, vol. 4, no. 2, pp. 49-52, 2017.
A. K. Aggarwal, S. Kumar, and V. Singh, "Mathematical modeling and fuzzy availability analysis for serial processes in the crystallization system of a sugar plant," International Journal of Industrial Engineering, vol. 23, no. 4, pp. 47-58, 2017.
R. Kumar, "Availability modeling of two unit system subject to degradation perfect repair post failure is feasible using RPGT," Proceedings of the International Conference on Emanations in Modern Technology and Engineering (ICEMTE), pp. 31-36, 2017.
A. Kumar, P. Goel, D. Garg, and A. Shau, "System behavior analysis in the urea fertilizer industry," Proceedings of the International Conference on Recent Developments in
S. Goyal and R. Malhotra, "A systematically study of reliability on various model," International Journal of Advanced Research in Science and Engineering, vol. 6, no. 6, pp. 864-876, 2017.
R. Gupta, C.K. Goel, and Tomer, "Stochastic analysis of two non-identical unit standby model," International Journal of Reliability and Safety Engineering, vol. 8, no. 1, pp. 1-8, 2018.
V. Goyal, "Analysis of two unit poly wrapping system with preventive maintenance and degradation," International Journal of Optics and Applied Mathematics, vol. 10, no. 3, pp. 118-121, 2018.
S. Thori and P. Goel, "Stochastic analysis of edible oil refinery industry," International Journal of Statistics and Applied Mathematics, vol. 7, no. 1, pp. 4-12, 2018.
R. Ahmad, "Reliability analysis comparison on punching tool sets due to different maintenance decisions: A case study from the pulp manufacturing industry," International Journal of Advanced Manufacturing Technology, vol. 95, no. 5, pp. 1969-1979, 2018.
A. Kumar, D. Garg, and P. Goel, "Behaviour analysis for bread making system," International Journal of Statistics and Applied Mathematics, vol. 7, no. 2, pp. 56-61, 2018.
A. Devi, V.K. Gupta, and V. Kumar, "Path analysis for MTSF and availability of a three unit standby stochastic system," Aryabhatta Journal of Mathematics and Informatics, vol. 9, no. 3, pp. 405-412, 2018.
Sunita and P. Goel, "Stochastic analysis of two unit system with increasing failure and repair rates," International Journal of Statistics and Applied Mathematics, vol. 7, no. 4, pp. 368-376, 2018.
A. Kumar, D. Garg, and P. Goel, "Mathematical modelling and behavioral analysis of a washing unit in a paper mill," International Journal of System Assurance Engineering and Management, vol. 10, no. 7, pp. 1639-1645, 2019.
S. Jindal and R. Garg, "Mathematical modelling and reliability analysis of server policy of library," XI’AN University of Architecture and Technology, vol. 2, no. 2, pp. 179-187, 2019.
M. Kumar, "System reliability analysis and optimisation of a soft drink plant: A case study," International Journal of Electronics Engineering, vol. 11, no. 8, pp. 860-871, 2019.
M. Yazdi, "Introducing a heuristic approach to enhance the reliability of system safety assessment," Quality and Reliability Engineering International, vol. 35, no. 7, pp. 2612-2638, 2019.
M. Gahlot, V.V. Singh, H. I. Ayagi, and I. Abdullahi, "Stochastic analysis of a two units’ complex repairable system with switch and human failure using copula approach," Life Cycle Reliability and Safety Engineering, vol. 17, no. 2, pp. 1-11, 2020.
Y. Shi, W. Zhu, Y. Xiang, and Q. Feng, "Condition-based maintenance optimization for multi-component systems subject to a system reliability requirement," Reliability Engineering and System Safety, vol. 199, pp. 1-29, 2020.
N. Gupta, M. Saini, and A. Kumar, "Behaviour analysis of cooling tower in steam turbine power plant using reliability availability maintainability and dependability investigation," Journal of Engineering Science and Technology Review, vol. 13, no. 3, pp. 191-198, 2020.
R. Kumar, "Cost benefit analysis of woolen industry," SSRN, vol. 18, no. 1, pp. 1-8, 2020.
D. Garg, "Profit analysis of manufacturing biscuit plant," SSRN, vol. 20, no. 1, pp. 1-10, 2020.
J. Qin and L. Z., "Reliability modelling for multistate system with preventive maintenance under customer demand," Complexity, vol. 2020, pp. 1-9, 2020.
H. Singh, M. Mehta, and J. Kumar, "Reliability analysis in process industries - An overview," Geographic Information Science, vol. 23, no. 4, pp. 151-168, 2020.
R. Garg, "Behavioral analysis of single unit system using RPGT," International Journal of Engineering Technologies and Management Research, vol. 7, no. 9, pp. 2723-2735, 2020.
X. Jia, L. Xing, and X. Song, "Aggregated Markov-based reliability analysis of multi-state systems under combined dynamic environments," Quality and Reliability Engineering International, vol. 36, no. 2, pp. 1-12, 2020.
V. Rykov, M. G. Sukharev, and V. Y. Itkin, "Investigation of the potential application of k-out-of-n systems in oil and gas industry objects," Journal of Marine Science and Engineering, vol. 8, no. 1, pp. 1-16, 2020.
A. Aggarwal, D. Garg, A. Kumar, and R. Kumar, "Performance analysis of the water treatment reverse osmosis plant," Reliability: Theory and Applications, vol. 14, no. 2, pp. 16-25, 2021.
S. Singla, S. Kumari, P. Khurana, and A. Kumar, "Solution of constrained problems using particle swarm optimization," International Journal of System Assurance Engineering and Management, vol. 12, no. 4, pp. 1688-1695, 2021.
D. Garg and R. Garg, "Reliability modelling and performance analysis of bio-coal manufacturing system with deviation in demand," Life Cycle Reliability and Safety Engineering, vol. 17, no. 6, pp. 403-409, 2021.
M.S. Barak, R. Garg, and A. Kumar, "Reliability measures analysis of a milk plant using RPGT," Life Cycle Reliability and Safety Engineering, vol. 17, no. 3, pp. 295-302, 2021.
A. Kumar, R. Bala, and P. Khurana, "Stochastic analysis of polytube plant," Journal of Mathematical Problems Equations and Statistics, vol. 6, no. 2, pp. 11-17, 2021.
S. Kumari, P. Khurana, and S. Singla, "Behaviour and profit analysis of a thresher plant under steady state," International Journal of System Assurance Engineering and Management, vol. 12, no. 2, pp. 166-171, 2021.
S. Bansal, S.L. Tyagi, and V.K. Verma, "Performance modelling and availability analysis of a screw manufacturing plant," Materials Today: Proceedings, vol. 39, no. 7, pp. 1985-1988, 2021.
A. Sharma, P. Ailawalia, and S. Singla, "RAM (Reliability, Availability, Maintainability) of threshing machine in agriculture," Agriculture and Natural Resources, vol. 55, no. 8, pp. 1057-1061, 2021.
S. Kumari, P. Khurana, and S. Singla, "RAP via constraint optimization genetic algorithm," Life Cycle Reliability and Safety Engineering, vol. 17, no. 4, pp. 341-345, 2021.
O. Afolalu, O.M. Ikumapayi, O. Okwilagwe, M.M. Emetere, and B.A. Adaramola, "Evaluation of effective maintenance and reliability operation management - A review," ICMED, vol. 5, no. 1, pp. 1-9, 2021.
M. Kamal, U.M. Modibbo, and A. AlArjani, "Neutrosophic fuzzy goal programming approach in selective maintenance allocation of system reliability," Complex Intelligent Systems, vol. 7, no. 4, pp. 1045-1059, 2021.
U.M. Modibbo, M. Arshad, O. Abdalghani, and I. Ali, "Optimization and estimation in system reliability allocation problem," Reliability Engineering & System Safety, vol. 200, pp. 1-10, 2021.
V. Rykov, O. Kochueva, and M. Farkhadov, "Preventive maintenance of a k-out-of-n system with application in subsea pipeline monitoring," Journal of Marine Science and Engineering, vol. 9, no. 3, pp. 1-18, 2021.
V. Rykov, N. Ivanova, D. Kozyrev, and T. Milovanova, "On reliability function of a k-out-of-n system with general repair time distribution," Probability in the Engineering and Information Sciences, vol. 35, no. 5, pp. 885-902, 2021.
M. Saini, A. Kumar, and D. Sinwar, "Parameter estimation reliability and maintainability analysis of sugar manufacturing plant," International Journal of System Assurance Engineering and Management, vol. 12, no. 6, pp. 1-9, 2021.
A. Kumar, "Performance analysis of a rice plant using RPGT," Electronic Journal of Engineering Sciences, vol. 8, no. 4, pp. 1-8, 2022.
D. Garg and R. Garg, "Reliability analysis and profit optimization of briquette machine by considering neglected faults," Reliability: Theory and Applications, vol. 19, no. 3, pp. 210-222, 2022.
S. Kumari, S. Singla, and P. Khurana, "Particle swarm optimization for constrained cost reliability of a rubber plant," Life Cycle Reliability and Safety Engineering, vol. 18, no. 3, pp. 273-277, 2022.
A. Kumar, "Cost-benefit study of a cold standby structure with waiting time aimed at repair," SSRN, pp. 1-8, 2022.
D. Garg and R. Garg, "Performance analysis of briquette machine considering neglected faults with preventive maintenance," International Journal of System Assurance Engineering and Management, vol. 13, no. 4, pp. 2075-2083, 2022.
D. Garg, A. Kumar, V.K. Joshi, and N. Fatima, "Sensitivity analysis of urea fertilizer plant," Reliability: Theory and Application, vol. 12, no. 2, pp. 178-189, 2022.
A. Naithani, S. Khanduri, and S. Gupta, "Stochastic analysis of main unit with two non-identical replaceable sub-units working with partial failure," International Journal of System Assurance Engineering and Management, vol. 13, no. 3, pp. 1467-1473, 2022.
M. Saini, N. Gupta, V.G. Shankar, and A. Kumar, "Stochastic modeling and availability optimization of condenser used in steam turbine power plants using GA and PSO," Quality and Reliability Engineering International, vol. 38, no. 6, pp. 2670-2690, 2022.
M. F. Khan, U.M. Modibbo, N. Ahmad, and I. Ali, "Nonlinear optimization in bi-level selective maintenance allocation problem," Journal of King Saud University - Science, vol. 34, no. 7, pp. 1-8, 2022
S. Singla and Pooja, "Mathematical analysis of regenerative point graphical technique (RPGT)," A Mathematical Analysis and Its Contemporary Applications, vol. 7, no. 2, pp. 49-56, 2022.
S. Singla, S. Verma, S. Malik, and A. Gupta, "Performability evaluation, validation, and optimization for the steam generation system of a coal-fired thermal plant," Methods X, vol. 12, pp. 1-17, 2022.
Y.S. Raghav, Mradula, R. Varshney, U.M. Modibbo, A.A.H. Ahmadini, and I. Ali, "Estimation and optimization for system availability under preventive maintenance," IEEE Access, vol. 10, pp. 94337-94353, 2022.
A.K. Singh and P.C. Tewari, "Overview of reliability, availability, maintainability, and safety strategies for complex systems in various process industries," International Journal of Performability Engineering, vol. 19, no. 4, pp. 788-796, 2023.
L. Munda, G. Taneja, and K. Sachdeva, "Reliability and profitability analysis of a mixed redundancy standby system comprising operative unit along with hot and cold standby," International Journal of Agricultural & Statistical Sciences, vol. 19, no. 3, pp. 1-16, 2023.
R. Gao and S. Zhang, "Reliability importance analysis of uncertain random k-out-of-n systems with multiple states," Reliability Engineering & System Safety, vol. 219, pp. 1-12, 2023.
S. Singla, S. Rani, U.M. Modibbo, and I. Ali, "Optimization of system parameters of 2:3 good serial system using deep learning," Reliability Theory and Applications, vol. 18, no. 5, pp. 670-679, 2023.
Shivani, M. Ram, N. Goyal, and A. Kumar, "Analysis of series-parallel systems sensitivity in context of component failures," RAIRO Operations Research, vol. 57, no. 4, pp. 2131-2148, 2023.
D. Xu, Y. Tian, J. Shi, D. Wang, M. Zhang, and H. Li, "Reliability analysis and optimal redundancy for a satellite power supply system based on a new dynamic k-out-of-n: G model," Reliability Engineering & System Safety, vol. 238, pp. 1-12, 2023.
S. Singla, D. Mangla, P. Panwar, and S.Z. Taj, "Reliability optimization of a degraded system under preventive maintenance using genetic algorithm," Journal of Mechanics of Continua and Mathematical Sciences, vol. 29, no. 6, pp. 1-14, 2024.
P. Su, G. Zang, G. Zhao, and Q. Qiu, "Reliability analysis of multi-state systems with k-out-of-n: G subsystems considering performance sharing," Journal of Operation Research Society, vol. 76, no. 4, pp. 1-13, 2024.
M. Yazdi, "Computational tools and techniques for reliability and maintainability," Advances in Computational Mathematics for Industrial System Reliability and Maintainability, vol. 15, pp. 59-77, 2024.
G. Levitin, L. Xing, and Y. Dai, "1-out-of-n standby systems with storages and activation moment-dependent component operation time limit," Reliability Engineering & System Safety, vol. 246, pp. 110048, 2024.
S. Jana and S. Islam, "A Pythagorean hesitant fuzzy programming approach and its application to multi-objective reliability optimization problem," Yugoslav Journal of Operations Research, vol. 34, no. 2, pp. 1-24, 2024.
P.K. Chahal, K. Kumar, and B.S. Soodan, "Reliability analysis and ANFIS computation for multi-server redundant machining system with the generalized triadic policy," Yugoslav Journal of Operations Research, vol. 34, no. 3, pp. 1-30, 2024.
H. Che, S. Zeng, Y. Zhao, and J. Guo, "Reliability assessment of multi-state weighted k-out-of-n man-machine systems considering dependent machine deterioration and human fatigue," Reliability Engineering & System Safety, vol. 247, pp. 110048, 2024.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) YUJOR
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
